- Pressure boosting pumps for inlet pressures of up to 26 bar
- Pressure boosting pumps for externally cooled tools or CTS application
- Pressure boosting at the machine (within central coolant systems)
- Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption
- Pump performance curves can be regulated using an adapted frequency converter
신청서 / 필드 항목
Pressure boosting systems
Pressure boosting at the machine (within central coolant systems)
Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption
Pump performance curves can be regulated using an adapted frequency converter
An even wider range of performance curves
As a booster pump for inlet pressures of up to 26 bar
Fluids coolants, emulsions, oils
Volumetric delivery up to 640 l/min
Delivery head up to 520 m
신청서 / 필드 항목
PET · PBT · PA · PC · PS · SAN · ABS · HIPS · PP · POM · Biopolymers
The viscoseal is the standard seal for WITTE EXTRU and BOOSTER pumps. This is a dynamic seal for high viscosities and suction pressures. It can be provided with heating or cooling. The dynamic seal is suitable for high pressures and temperatures. Its range of use is limited by the suction pressure and the viscosity of the medium being conveyed (at least 10 Pas). The viscosity can be increased by an additional cooling system if necessary.
max. temperature: 450°C (850°F)
Viscosity: 10000 to 40000000 mPas (cP)
The stuffing box is a simple (static) seal for WITTE gear pumps. It can be provided with buffering if so desired. The range of application is similar to that of the viscoseal. The standard material used for the packing rings is made of expanded pure graphite with structural textile fibes. But it goes without saying, that other materials are also available.
max. temperature: 350°C (660 °F)
Viscosity: up to 40000000 mPas (cP)
BOOSTER gear pumps are used in the polymerisation process, to boost the pressure of medium to high viscosity media. They transport pre-polymers and polymers, e.g. PET, PBT, PS, ABS any many more, very gently Heating is either by way of heat transfer oil or steam.
The core components like shafts and friction bearings originate from the WITTE building block system.
Heat resistant carbon steel, e.g. 1.6582 · rust-free stainless steel 1.4313 · with optional coating
Tool steel · nitrated steel · special steel · with optional surface coating · helical gearing · herringbone gearing (for extremely low-pulsation conveyance)
Tool steel · NiAg (nickel-silver) · Al-bronze · special materials · with optional surface coating
Viscoseal · stuffing box · (Vacuum viscoseal)
Heat transfer oil · steam
up to 40000 Pas
up to 350°C (660°F)
Vacuum up to max. 120 bar (1740 psig)
Up to 250 bar (3225 psig)
The values listed are maximum values and must not coincide under certain circumstances.
From 22/22 (4.7 cm3/U - 10 kg/h) up to 280/280 (12000 cm3/U - 30000 kg/h).